Plastic Case LFP Cells, 20Ah - 200Ah LiFePO4 Batteries CE
1. Long cycle life: More than 2500 times (charge and discharge at
1C, 80% capacity retention after 2500 cycles);
2. High safety: No fire and explosion in overcharge test at the
voltage up to 30V and in short-circuit test,nail test, heat shock
up to 130℃ test;
3. Good charging and discharging performance;
4. High discharge rate up to 10C;
5. All raw material of the batteries are environmental-friendly;
6. Wide working temperature range: From -10℃ to 60℃, extremely cold
and hot weather will not affect its performance.
7.Produced with automatic equipments and divided by automatic
grouping system,ensure the battery excellent consistency.
7.Eco-friendly with TS10949 system,compliance with ETL,UN,CE and
III. LiFePO4 cells in Plastic case
|Model||Nominal Voltage||Nominal Capacity||Resistance||Coninuous Discharge Current||Discharge Cut-off Voltage||Charge Current||Charge Cut-off Voltage||Dimensions (including the )||Approx Weight||Cycle Life|
1. Charge-discharge Curves for LiFePO4 battery
2. Ratio-discharge for LiFePO4 battery
3. Discharge Curves at 0.2C at different temperature for LiFePO4
4. Cycle life Characterristics for LiFePO4 battery
The list of HECO LFP cell models, please downlowd:
Catalogue on HECO LiFePO4 Cells.pdf
1. Long cycle life (2000 cycles) is several times greater than
Ni-MH, Ni-Cd or lead-acid.
2. No toxic, or polluting material(such as lead, cadmium, mercury)
is contained in lithium battery, which is a kind of green battery.
3. High safety. LiFePO4 is an intrinsically safer cathode material
than Lithium-ion since exothermic reactions can not occur in
batteries based on this material LiFePO4 cells do not incinerate or
explode under extreme conditions.
4. Good performance in high-current discharge cycles. We can design
different capacity and size according to your demands.
For many applications, our battery systems result in significantly
lower total cost of ownership over lead acid because
lighter-weight, longer-life batteries means fewer replacements,
reduced maintenance and service costs, less shipping and material
handling costs, and lower total inventory carrying costs.
1. Advanced polymer lithium-ion battery technology system ensure
the correct technical direction and advanced leading technology
2. Excellent procedure quality tracking control system ensure HECO
battery’s excellent performance and good consistency.
3. One-stop lithium battery system solutions. Heco’s research and
development team include electronic engineer, mechanical engineer,
structure engineer, whom could offer our clients one stop solutions
including BMS, charger, battery pack structure, and overall
4. Intimate and in time reacting service system. We always try to
offer more than expected, do more than required.
Tag: 200ah LiFePO4 battery cell, 20000mah LiFepo4 battery cell, LFP